MOTOR, COMMERCIAL REFRIGERATION, 3.3", HP: 1/12, 1/15, 1/20, 115/230V, 1550RPM

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
MOTOR, COMMERCIAL REFRIGERATION, 3.3", HP: 1/12, 1/15, 1/20, 115/230V, 1550RPM
Sealed Unit Parts Company
SUPCO
Part# SM1127
Fan Motor
COMMERCIAL REFRIGERATION MOTOR
3-3/8" DIAMETER
HP: 1/12, 1/15, 1/20
115/230 VOLT APPLICATIONS
RPM: 1550
AMPS: 1.1 FOR 115VAC  & 0.6 FOR 230VAC
ROTATION IS REVERSABLE
ONE SPEED, 1550 RPM
SHAFT: 5/16" X  3-1/8" LONG
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
CAN BE MOUNTED FROM 4 LUGS ON FRONT OR BACK OF THE MOTOR.
CAN ALSO BE BELLY BAND AROUND MOTOR MOUNTED.
THE MOTOR IS 3-3/8" IN DIAMETER.
VOLTAGE: DUAL, 115/230-1  SINGLE PHASE
RPM: 1550
HP: 1/12, 1/15 & 1/20
AMPS: 1.1/0.6
ROTATION: REVERSABLE
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 3-1/8"
FRONT STUDS, CENTER TO CENTER: 2"
THE LENGTH OF THE STUDS IS: 1/2"
MOTOR COMES WITH (8) EIGHT NUTS FOR THE EIGHT STUDS. (4 IN FRONT & 4 IN BACK OF MOTOR)
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 3-1/2"
COMES WITH RUN CAPACITOR WHICH IS 5MFD X 370 VAC
THERMALLY PROTECTED
CLASS B
BALL BEARING MOTOR
NO OILING REQUIRED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the listing to be sure it will work.
Sealed Unit Parts Company SUPCO Part# SM1127 Fan Motor COMMERCIAL REFRIGERATION MOTOR 3-3/8" DIAMETER HP: 1/12, 1/15, 1/20 115/230 VOLT APPLICATIONS RPM: 1550 AMPS: 1.1 FOR 115VAC & 0.6 FOR 230VAC ROTATION IS REVERSABLE ONE SPEED, 1550 RPM SHAFT: 5/16" X 3-1/8" LONG USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS. USED ON MANUFACTURERS LIKE; BOHN LARKIN HEATHCRAFT PEERLESS PERLICK LEER VOLLRATH TONKA, just to name a few............. CAN BE MOUNTED FROM 4 LUGS ON FRONT OR BACK OF THE MOTOR. CAN ALSO BE BELLY BAND AROUND MOTOR MOUNTED. THE MOTOR IS 3-3/8" IN DIAMETER. VOLTAGE: DUAL, 115/230-1 SINGLE PHASE RPM: 1550 HP: 1/12, 1/15 & 1/20 AMPS: 1.1/0.6 ROTATION: REVERSABLE SHAFT SIZE: 5/16" SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 3-1/8" FRONT STUDS, CENTER TO CENTER: 2" THE LENGTH OF THE STUDS IS: 1/2" MOTOR COMES WITH (8) EIGHT NUTS FOR THE EIGHT STUDS. (4 IN FRONT & 4 IN BACK OF MOTOR) MOTOR DIAMETER: 3-3/8" MOTOR LENGTH: 3-1/2" COMES WITH RUN CAPACITOR WHICH IS 5MFD X 370 VAC THERMALLY PROTECTED CLASS B BALL BEARING MOTOR NO OILING REQUIRED This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers. It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts. Simply match your motor to the specs in the listing to be sure it will work.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
MOTOR, COMMERCIAL REFRIGERATION, 3.3", HP: 1/12, 1/15, 1/20, 115/230V, 1550RPM
Sealed Unit Parts Company
SUPCO
Part# SM1127
Fan Motor
COMMERCIAL REFRIGERATION MOTOR
3-3/8" DIAMETER
HP: 1/12, 1/15, 1/20
115/230 VOLT APPLICATIONS
RPM: 1550
AMPS: 1.1 FOR 115VAC  & 0.6 FOR 230VAC
ROTATION IS REVERSABLE
ONE SPEED, 1550 RPM
SHAFT: 5/16" X  3-1/8" LONG
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
CAN BE MOUNTED FROM 4 LUGS ON FRONT OR BACK OF THE MOTOR.
CAN ALSO BE BELLY BAND AROUND MOTOR MOUNTED.
THE MOTOR IS 3-3/8" IN DIAMETER.
VOLTAGE: DUAL, 115/230-1  SINGLE PHASE
RPM: 1550
HP: 1/12, 1/15 & 1/20
AMPS: 1.1/0.6
ROTATION: REVERSABLE
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 3-1/8"
FRONT STUDS, CENTER TO CENTER: 2"
THE LENGTH OF THE STUDS IS: 1/2"
MOTOR COMES WITH (8) EIGHT NUTS FOR THE EIGHT STUDS. (4 IN FRONT & 4 IN BACK OF MOTOR)
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 3-1/2"
COMES WITH RUN CAPACITOR WHICH IS 5MFD X 370 VAC
THERMALLY PROTECTED
CLASS B
BALL BEARING MOTOR
NO OILING REQUIRED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the listing to be sure it will work.
Sealed Unit Parts Company
SUPCO
Part# SM1127
Fan Motor
COMMERCIAL REFRIGERATION MOTOR
3-3/8" DIAMETER
HP: 1/12, 1/15, 1/20
115/230 VOLT APPLICATIONS
RPM: 1550
AMPS: 1.1 FOR 115VAC  & 0.6 FOR 230VAC
ROTATION IS REVERSABLE
ONE SPEED, 1550 RPM
SHAFT: 5/16" X  3-1/8" LONG
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
CAN BE MOUNTED FROM 4 LUGS ON FRONT OR BACK OF THE MOTOR.
CAN ALSO BE BELLY BAND AROUND MOTOR MOUNTED.
THE MOTOR IS 3-3/8" IN DIAMETER.
VOLTAGE: DUAL, 115/230-1  SINGLE PHASE
RPM: 1550
HP: 1/12, 1/15 & 1/20
AMPS: 1.1/0.6
ROTATION: REVERSABLE
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 3-1/8"
FRONT STUDS, CENTER TO CENTER: 2"
THE LENGTH OF THE STUDS IS: 1/2"
MOTOR COMES WITH (8) EIGHT NUTS FOR THE EIGHT STUDS. (4 IN FRONT & 4 IN BACK OF MOTOR)
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 3-1/2"
COMES WITH RUN CAPACITOR WHICH IS 5MFD X 370 VAC
THERMALLY PROTECTED
CLASS B
BALL BEARING MOTOR
NO OILING REQUIRED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the listing to be sure it will work.